List of Articles Heavy metals

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Waste Management of Petrochemical Industries and Its Management
  زهرا ضمیرایی علی ناهد
  10.29252/.3.4.15
  20.1001.1.26763060.1397.3.4.3.1
  Natural gas and crude distillates such as naphtha from petroleum refining are used as feedstocks to manufacture a wide range of petrochemicals that are in turn used in the manufacture of consumer goods. Petrochemical plants are typically l More

  Natural gas and crude distillates such as naphtha from petroleum refining are used as feedstocks to manufacture a wide range of petrochemicals that are in turn used in the manufacture of consumer goods. Petrochemical plants are typically large and complex, and the combination and sequence of products manufactured are often unique to the plant. Petrochemical plants generate significant amounts of solid wastes and sludges, some of which are hazardous because of the presence of toxic organics and heavy metals. A good practice target for a petrochemical complex is to reduce total organic emissions (including VOCs) from the process units to 0.6% of the throughput. In this paper a variety of control of air emissions techniques is has been studied. Petrochemical waste waters often require a combination of treatment methods to remove oil and other contaminants before discharge. For solid and hazardous wastes, combustion (preceded in some cases by solvent extraction) of toxic organics is considered an effective treatment technology for petrochemical organic wastes. Steam stripping and oxidation are also used for treating organic waste streams. The generation of sludges should be minimized. Wastes containing toxic metals should be stabilized before disposal. Manuscript profile
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Examining the amount of cadmium and lead in the soil downstream of Taybad landfill
  akram ghorbani Mohammad ghafori Mohammad javad alipoor
  20.1001.1.26763060.1402.8.13.3.4
  The aim of this study was to investigate the emission of heavy metals (cadmium and lead) in the soil around Taybad landfill. For this purpose, 15 stations at a distance of 100 meters from each other to the landfill of Taybad city were selected for sampling. Sampling 5 s More

  The aim of this study was to investigate the emission of heavy metals (cadmium and lead) in the soil around Taybad landfill. For this purpose, 15 stations at a distance of 100 meters from each other to the landfill of Taybad city were selected for sampling. Sampling 5 samples and repeating 3 times from each station, the samples were transferred to the laboratory for analysis to check the level of pollution indicators. Hypotheses were analyzed using one-sample t-test and Pearson's correlation coefficient with spss 24 software. It was found that the average total concentration of lead is equal to 52.04 and the average total concentration of cadmium is equal to 1.748. The concentration of the mentioned metals is significantly higher than the average global soil and earth's crust with 95% confidence. In the case of lead and cadmium, the highest contamination was in station 10 and 4, and the lowest contamination was in station 6 and 12, respectively. It is concluded that the amount of soil contamination does not change significantly with increasing distance, because the volume and concentration of contaminant runoff from the landfill (contaminant) along the path is constant. Therefore, it is better to provide environmental training for municipal municipal personnel and citizens of the region and to invest in the restoration of the environment and its further protection. Manuscript profile